• Plastic welding
• Scientific research
• Laser soldering
| Parameter | Unit | Specification |
|---|---|---|
| Optical specifications | ||
| Model | — | MS-A50 |
| CW output power | W | 50 |
| Center wavelength | nm | 976 ± 10 |
| Spectral width (FWHM) | nm | < 6 |
| Wavelength temperature shift | nm/°C | 0.3 |
| Output power instability at 25 °C | % | ± 3 (5 h) |
| Power adjustment range | % | 10–100 |
| Fiber specifications | ||
| Fiber core diameter | µm | 200 / 400 |
| Numerical aperture (NA) | — | 0.22 |
| Fiber length | m | 5 or 10 (pluggable) |
| Fiber termination | — | SMA905 female on system; SMA905 male at both cable ends |
| Fiber armor diameter | mm | 3 |
| Electrical and control specifications | ||
| Power supply | — | 24 V DC |
| Input current | A | < 7 |
| Power consumption | W | < 150 |
| Operating mode | — | CW / modulation; constant current |
| Control interface | — | RS232, I/O |
| Modulation frequency | Hz | 1–20,000 |
| Duty cycle | % | > 0.01 |
| Pulse width (pulse mode) | — | 20 µs–950 ms |
| Pulse width (single pulse) | — | 20 µs–999 ms |
| Minimum rise / fall time | µs | ≤ 10 |
| Aiming beam wavelength | nm | 635 ± 10 |
| Aiming beam power | mW | 2 |
| Mechanical and environmental specifications | ||
| Dimensions (L × W × H) | mm | 242 × 156 × 120 |
| Weight | kg | < 5 |
| Cooling | — | Air cooling |
| Operating temperature | °C | 15–30 |
| Storage temperature | °C | 5–50 |
| Relative humidity | % | 5–80, non-condensing |
| Laser safety class | — | Class 4 (EN 60825-01) |
Pair your diode with the right driver and temperature controller for stable, reliable performance.
Precise, low-noise current control for optimal diode performance and extended lifetime.
View Drivers
Active thermal management for wavelength stability and consistent output power.
View TEC ControllersWe offer custom laser diodes according to your needs, either high-power or low-power versions, fiber-coupled or free-space, specific wavelengths, wavelength-stabilized options, and single or multi-emitter diodes. To discuss your custom laser diode needs, you can contact us by sending an email or using the contact form.
