• Laser welding
• Laser cladding
• Surface treatment
• Laser edge banding
| PARAMETER | UNIT | SPECIFICATION |
|---|---|---|
| Optical specifications | ||
| Output power | W | 6000 |
| Wavelength | nm | 950 ± 50 |
| Output fiber core diameter | µm | 1000 |
| Numerical aperture (NA) | — | Custom |
| Output cable length | m | 15 or customized |
| Output cable connector | — | QBH |
| Aiming beam | — | Red |
| Operation mode | — | CW or modulation |
| Polarization | — | Random |
| Power stability at 25 °C (2 h) | % | < ±1.5 |
| Power adjustment range | % | 10–100 |
| Maximum modulation frequency | kHz | 5 |
| Size and weight | ||
| Dimensions (H × W × D) | mm | 93 × 482 × 861 |
| Weight | kg | 67 |
| Electrical specifications | ||
| Power supply | — | 380 ± 20 V AC, PE, 50/60 Hz |
| Power consumption | kW | 18.0 |
| Control interface | — | RS232/AD |
| Water cooling requirements | ||
| Minimum cooling capacity | kW | 13.0 |
| Laser module temperature setting | °C | 25 |
| QBH temperature setting | °C | 30 |
| Cooling tube inside diameter | mm | 25 |
| Laser cooling water flow rate | L/min | > 55 |
| QBH cooling water flow rate | L/min | 1.5–2.0 |
Pair your diode with the right driver and temperature controller for stable, reliable performance.
Precise, low-noise current control for optimal diode performance and extended lifetime.
View Drivers
Active thermal management for wavelength stability and consistent output power.
View TEC ControllersWe offer custom laser diodes according to your needs, either high-power or low-power versions, fiber-coupled or free-space, specific wavelengths, wavelength-stabilized options, and single or multi-emitter diodes. To discuss your custom laser diode needs, you can contact us by sending an email or using the contact form.
