Skip to content 
Laser Diode Lifetime Calculator
How it works?
The Arrhenius Law of Reliability
Semiconductor laser diodes degrade over time due to crystal defects growing within the active region (dark line defects). Heat accelerates the movement of these defects.
The relationship between temperature and lifetime follows the Arrhenius Equation. This formula calculates an "Acceleration Factor" to predict how much faster a device will fail at elevated temperatures compared to its datasheet baseline.
- Ea (Activation Energy): A constant describing the material's sensitivity to heat. Typical GaAs laser diodes range from 0.3 eV to 0.7 eV.
- kB: Boltzmann's constant (\(8.617 \times 10^{-5}\) eV/K).
- T: Temperature in Kelvin.
Heat is the Enemy of Reliability
Laser diodes are remarkably reliable devices when operated correctly, often boasting Mean Time Between Failures (MTBF) of >20,000 hours. However, they are highly sensitive to thermal stress. A general rule of thumb in semiconductor engineering is the "10°C Rule": for every 10°C increase in operating temperature, the lifetime of the device is cut in half.
This reduction happens because heat provides the energy required for crystal defects to migrate and grow into the active region of the laser (a process called dark-line defect growth), eventually causing a rapid drop in optical efficiency.
Strategies to Maximize Lifetime
Using the calculator above, you can see that running a diode just 20°C hotter than spec can destroy 75% of its potential lifespan. To ensure your system lasts for years in the field:
- Use Active Cooling: Passive heatsinking is rarely enough for high-power diodes. Use a mount with an integrated TEC (Peltier) to lock the case temperature to 25°C.
- Derate the Current: Running a diode at 80% of its maximum current rating can often double its expected lifetime.
- Clean Power: Transients from poor power supplies cause instant damage. Always use a dedicated Laser Diode Driver.
